Work, driven by the motor, the rotor speed rotation, the material into the zone plate hammer, and hammer on the rotor impact crusher, and then was thrown back again on the broken device, then from the liner bounce back to the board hammer area to break, this process is repeated, the material descending into one, two, three, repeated crushing counter chamber until the material is broken to the desired size, from the discharge port. Stone from the machine directly into the upper high-speed rotation of the turntable; centrifugal force at high speed, with another way of diverting part of the umbrella flying around on the turntable produces stone and high-density high-speed collision crushed stone in the fight against each other, then they will formed between the wheel and chassis caused by vortex motion against each other many times, rubbing, grinding, from the bottom through discharge. Form a closed loop many times, controlled by the screening equipment to the required size. The particle size the user adjust the hammer and the back plate, the gap between both parts of the whole to achieve.

1.By changing rotor and crushing cavity according to the customer's requirements;
2.It is widely used in mining , quarry, building, chemical, electricity and so on ; Can crushing compressive strength is below 250Mpa, surface moisture is no more than 8% mining or viscous ;
3.It features high reduction ratio, steady performance and so on;
4.Especially for the artificially sand system ,It is the priority is use new type Crusher.